The Neck Plate Warrior is a late gorget - an oval plate of armour designed to sit around the neck and give additional protection to the vitals of neck, throat and thorax. The neck plate has an elongated front piece and a shorter back piece, which are fitted together and can be fastened to a breast- and back plate with top-grain leather straps. The neck plate also provides fastenings for additional shoulder armour. The Neck Plate Warrior is made from mild steel with rolled edges. At the outer rim it is decorated with shiny metal rivets. Though designed to go with the other 'Warrior' armours it is fully interchangeable with other Epic Armoury armours allowing the wearer full freedom to customize character looks.¶Made from 1mm thick mild steelRolled edges with no sharp edgesStraps and fittings made from top-grain leatherAdjustable ductile steel flanks for closer body-fitHand made, welded pieces for maximal durabilityPolished steel surfaces¶Keep armour pieces dry and apply a thin layer of oil during storage to avoid rust. Rub with fine steel wool to remove patches and wipe with oil if rust appears. All metal armours contain leather parts, which need regular care with leather-care products to keep the leather from drying out.

Steel 1mm

You look upon your leading officer as he makes his way down the line of your fellow soldiers. Your fate and the fate of your entire unit is dependent on this veteran's word, and you find yourself relieved not to shoulder such a heavy burden. Plate armour became more popular as firearm technology became more prevalent during the 13th centuryHistorically designed with sculpted ridges and overlapping plates to provide reinforced protection and to deflect attacks on a chaotic battlefield¶Made from 1mm/19 gauge thick mild steelRolled edges with no sharp edgesStraps and fittings made from top-grain leatherHand made, welded pieces for maximum durabilityPolished steel finish¶Epic Armoury metal works products should still be treated with oil and kept in dry storage. All our metal armours contain leather parts that need regular maintenance using leather-care products to keep the leather from drying out.¶Cleaning¶If your armour does get wet, it is important that you dry it thoroughly as soon as possible.¶After handling, wearing, or after six months of storage or display, all metal should be wiped with a clean cloth. Lightly oil the clean surface with a quality machine or mineral oil. Alternatively, you can apply a coating of wax to the entire surface of exposed metal. Allow the wax to dry for a couple of hours and then buff it lightly with a soft cloth.¶Rust-Prevention and Removal¶Store your armour is a dry place and check it every couple of months for signs of rust. If any is found, remove it by gently rubbing the affected spot with a mildly abrasive pad dipped in paste wax, oil, or water-displacing liquid.¶Leather Straps and Fittings¶Clean by removing dirt with a hard brush, then gently rub on leather soap with a clean, damp cloth until the leather appears clean. Remove soap with a separate damp cloth to wipe away any soap residue and then use a dry cloth to wipe away any remaining water from the leather.¶You should always condition leather after cleaning, since the soap will have removed some of its natural oils. Treat the leather with mink oil, olive oil, or beeswax polish with a clean cloth, gently rubbing a small amount of oil or polish in circles into the leather. Allow the leather to soak in the oil before wiping the leather with a final clean cloth to remove any excess residue.¶

 

 

Size S:

Length: 35cm, Width: 18cm, Weight: ca 1,9kg

 

Size M/L/XL:
Length 40cm, Width: 20cm, Weight: ca 2,5kg

Steel 1mm

You look upon your leading officer as he makes his way down the line of your fellow soldiers. Your fate and the fate of your entire unit is dependent on this veteran's word, and you find yourself relieved not to shoulder such a heavy burden.couters and vambraces attached to comfortable leather that enclose and protect the entire forearm. Rolled edges and small ridges around the rim further protect the elbow, making it less likely that you would take a lucky strike from an enemy.Forearm protection like this would have been called a vambrace or forearm guardPlate armor became more popular as firearm technology became more prevalent during the 13th century¶Made from 1mm/19 gauge thick mild steelRolled edges with no sharp edgesStraps and fittings made from top-grain leatherHand made, welded pieces for maximum durabilityPolished steel finish¶Epic Armoury metal works products should still be treated with oil and kept in dry storage. All our metal armours contain leather parts that need regular maintenance using leather-care products to keep the leather from drying out.¶Cleaning¶If your armour does get wet, it is important that you dry it thoroughly as soon as possible.¶After handling, wearing, or after six months of storage or display, all metal should be wiped with a clean cloth. Lightly oil the clean surface with a quality machine or mineral oil. Alternatively, you can apply a coating of wax to the entire surface of exposed metal. Allow the wax to dry for a couple of hours and then buff it lightly with a soft cloth.¶Rust-Prevention and Removal¶Store your armour is a dry place and check it every couple of months for signs of rust. If any is found, remove it by gently rubbing the affected spot with a mildly abrasive pad dipped in paste wax, oil, or water-displacing liquid.¶Leather Straps and Fittings¶Clean by removing dirt with a hard brush, then gently rub on leather soap with a clean, damp cloth until the leather appears clean. Remove soap with a separate damp cloth to wipe away any soap residue and then use a dry cloth to wipe away any remaining water from the leather.¶You should always condition leather after cleaning, since the soap will have removed some of its natural oils. Treat the leather with mink oil, olive oil, or beeswax polish with a clean cloth, gently rubbing a small amount of oil or polish in circles into the leather. Allow the leather to soak in the oil before wiping the leather with a final clean cloth to remove any excess residue.¶

Steel 1mm

Capturing the distinct design elements that have become synonymous with one of the oldest types of armour in the world, this Epic Black Alaric Chainmail will allow you to conquer the battlefield and enemy, safe in the knowledge that you are suitably protected.

 

Offering exceptional protection, movement and authenticity, this historically inspired chainmail armour was first introduced in the 4th century B.C, and is still used today.

 

Made from mild steel, this epic armour boasts butted rings that are interlocked in a 4-in-1 design, armpits that have been reinforced with riveted rings and chemically coloured steel.

 

 

Steel 1mm

Black Medieval Boots

upper: PU, inner: PVC

A scabbard allows you to keep your weaponry within easy reach should you need it, whilst also storing it safely when not in use.

 

An essential item for any adventurer or warrior to ensure their weapon is always within reach in case of an ambush or an unexpected fight.

 

This scabbard is made from leather and attaches to the belt with a single loop, but two straps hang off a metal ring to provide stability for the sheath itself. The sheath has three buckles on as a design feature for medieval authenticity.

leather

LARP Sword from the famous weapon smith Calimacil from Canada

 

 

Sir Radzig's Sword from Kingdom Come: Deliverance

 

Weight 550g

Total length 118cm

blade length 93cm

These bestselling Epic Armoury Leather Gloves are thick, handsome leather gloves with 15 cm long cuffs. They are made from plated, chrome-tanned leather and stitched at all joints around the fingers, wrists and edges. This stitching improves the strength of the material by preventing it from deforming with heavy use or from exposure to the environment. The fit of the gloves can be adjusted with a drawstring set through four brass eyelets on the outside of the cuff.

 

The gloves are fully compatible with other Epic Armoury metal and leather items and are particularly useful paired with leather and steel gauntlets. Their low-fantasy look and moderate style can be used with a multitude of settings, allowing freedom to create your own unique costume.

Leather

 

 

Wide leather strap, onto which we have attached a leather belt, decorated with buckler rivets.

The belt is loose between the riovets so can easily attach your accessories to the belt.

 

 

S/M is about 32-40 inches (82-102cm)

L/XL is about 38-46 inches (98-118cm)

XXL is about 45-53 inches (114-134cm)

 

 

We can do bigger or smaller sizes as well, just ask.

Leather

 

Surcoat with coat of arms made of 100% cotton with a embroidery showing two silver rampant lions facing each other.

 

Embroideries on a coat of arms are the best way to show the affiliation to a certain noble family or clan or royal house.

 

If you ever wanted to have your own coat of arms embroidered on a surcoat, a cloak, leather or whatever, just drop us a line. We can digitize your coat of arms and embroider it on almost any clothing, also multicolour, at a reasonable price.

 

Get your unique surcoat now! Just head over to the contact section and drop us a line.

 

(the chainmail, armour and the belt are not included)

100% cotton

 

Ideal for any Medieval, Renaissance or fantasy role, this Medieval Open Sleeve Shirt captures the heart of traditional Medieval style that is not only historically accurate, but also looks the part!

 

With its classic and incredibly comfortable design, and lace up stand up collar, this Medieval short is an ideal base costume piece for any character.

 

Made from 100% medium soft weave cotton, this versatile shirt is suitable for Larp, Banquets, SCA, Stage & Film Productions, Weddings and Historical themed events, and is available in a wide range of sizes.

 

This shirt runs a bit smaller than usual, especially in total and sleeve length. Just order one size larger to be on the safe side.

 

Find the measurements for the medieval shirt (measurements in cm, roundabout)

 

 

100% cotton

 

Handwoven medieval trousers to cover every player's modesty! These medieval trousers will help you stay comfortable in any role play situation or themed event, whether you are a humble peasant or the Lord of the Land.

 

They are available in a range of colours to add some variety to your wardrobe, including bright colours to help you show allegiances to clans or houses of show off your status.

 

The breeches have an elasticated waist to make them easy to adjust and have two pockets to keep your trinkets, spells or food. They're made from 100% cotton and are available in S-XXXL.

 

Here are the measurments (appr.):

 

 

 

100% cotton